Products

2011-2014 Stage 2 procharger tuner kit mustang gt

$6,299.00

Procharger 5.0L Mustang HO Stage II Intercooled Kit   Industry Leading Power With ProCharger technology, reliably adding big horsepower to your engine is a lot...

2015+ HELLCAT/DEMON/RED EYE STAGE 2 (HPJ) PACKAGE

$8,300.00

***YOU MUST SELECT YOUR YEAR + MODEL VEHICLE AT THE BOTTOM OF THIS PAGE!*** ***THIS PACKAGE REQUIRES RUNNING E85 OR RACE FUEL!*** - JLT COLD...

2015-2017 Hellcat (Stage 1) PACKAGE

$3,319.00

- JLT Cold Air intake - Cat delete pipes - Metco Pulley -Unlock PCM and tune -Gates HD belt -Thermostat -NGK spark plugs  - PROFESSIONAL...

2015-2017 PROCHARGER STAGE 2 (HPJ) PACKAGE

$9,900.00

***FOR ANY ADDITIONAL UPGRADES OR MODIFICATIONS DONE TO THIS PACKAGE, PLEASE CALL OR EMAIL US AT HPJ.*** - D1SC PROCHARGER - 1200HP INTERCOOLER - BRISK...

2015-2017 STAGE 1 PROCHARGER KIT

$7,690.00

***THIS PACKAGE IS FOR STOCK CARS - LIGHTLY MODIFIED CARS ONLY!*** - P1SC PROCHARGER - INJECTORS - BRISK SPARK PLUGS - TUNE - TUNING DEVICE...

2015-2017 WHIPPLE STAGE 1 KIT

$8,490.00

**THIS PACKAGE IS FOR STOCK CARS - LIGHTLY MODIFIED CARS ONLY!** - WHIPPLE SUPERCHARGER ( GEN 3, 2.9) - 56LB INJECTORS - BRISK SPARK PLUGS...

2015-2017 WHIPPLE STAGE 2 KIT

$9,490.00

**THIS PACKAGE IS FOR STOCK CARS - LIGHTLY MODIFIED CARS ONLY!** - WHIPPLE SUPERCHARGER (GEN 3, 2.9) - 72LB INJECTORS - BRISK SPARK PLUGS -...

2015-2017 WHIPPLE STAGE 3 (HPJ) PACKAGE

$12,740.00

***FOR ANY ADDITIONAL UPGRADES OR MODIFICATIONS DONE TO THIS PACKAGE, PLEASE CALL OR EMAIL US AT HPJ.*** - WHIPPLE SUPERCHARGER ( GEN 3, 2.9) -...

2018+ P1X (HPJ) PACKAGE

$9,800.00

***FOR ANY ADDITIONAL UPGRADES OR MODIFICATIONS DONE TO THIS PACKAGE, PLEASE CALL OR EMAIL US AT HPJ.*** - STAGE 2 PROCHARGER P1X - BOOST A...

2018+ STAGE 3 WHIPPLE (HPJ) PACKAGE

$10,495.00

***FOR ANY ADDITIONAL UPGRADES OR MODIFICATIONS DONE TO THIS PACKAGE, PLEASE CALL OR EMAIL US AT HPJ.*** - WHIPPLE SUPERCHARGER (GEN 5, 3.0) - 132MM...

2018+ WHIPPLE STAGE 1 KIT

$8,900.00

 **THIS PACKAGE IS FOR STOCK CARS - LIGHTLY MODIFIED CARS ONLY!** - WHIPPLE SUPERCHARGER (GEN 5, 3.0) -INJECTORS -TUNING -TUNING DEVICE -PROFESSIONAL INSTALLATION **NO UPGRADE...

2018+ WHIPPLE STAGE 2 KIT

$9,500.00

 **THIS PACKAGE IS FOR STOCK CARS - LIGHTLY MODIFIED CARS ONLY!** - WHIPPLE SUPERCHARGER (GEN 5, 3.0) - 132MM THROTTLE BODY - DW400 FUEL PUMP...

BMR A-Arm Support Brace (07-14 GT500)

$49.95

BMR Anti-Wheel Hop Package (07-14 GT500)

$449.00

Anti-wheelhop Package - Consists of Billet Lower Controls(ACA004) and Control Arm Relocation Brackets(CAB005)

BMR Billet Aluminum Rear Differential Bushing Kit - 15+ Mustang

$159.95

- Fits 2015-newer S550 Mustangs - Designed for max-effort street performance, drag race, and handling applications- Billet aluminum differential bushings- Zinc-coated inner sleeves - Eliminates...

BMR Bushing Removal Tool

$129.95

-Designed to remove the factory bushings and install BMR's BK055 Bearings-Manufactured from heavy-duty steel tubing-Uses all Grade-8 hardware, including Grade-8 threaded rod-Torrington bearings for smooth...

BMR Camber bolts - Front 2.5* Offset

$29.95

Correct front wheel alignment and add camber adjustability to the front of your S550 Mustang with Camber Bolts from BMR Suspension. The factory camber adjustability...

BMR Caster Camber Plates - 15-17 Mustang

$309.95

Add caster and camber adjustability, and fix alignment issues on your lowered S550 Mustang with Caster/Camber Plates from BMR Suspension. The factory alignment adjustability can...

BMR Chassis Jacking Rails - 15+ Mustang

$269.95

- 100% bolt-on design- No fabrication needed- Installs with simple hand tools- 1.5- x 2-inch boxed steel tubing- 3/16-inch laser-cut CNC-formed plate steel- Reuses factory...

BMR Cradle Bushing Lock-Out Kit - 15+ Mustang

$199.95

- 100% bolt-on design- No fabrication needed- Installs with simple hand tools- CNC-machined 6061-T6 billet aluminum upper bushing lockout rings- Laser-cut lower bushing support washers-...

BMR Differential Bushing Kit (07-14 S197)

$49.95

- Fits 2005-2014 S197 Mustang - Designed for street performance, drag race, and handling applications- Multi-durometer polyurethane differential bushing- Decreased bushing deflection- Internally fluted bushings-...

BMR Driveshaft Safety Loop (05-10 Mustang)

$89.95

- Fits 2005-2010 V6 and V8 Ford Mustang- Bolt-on design- No fabrication needed- Complies with NHRA rules- Required for cars quicker than 13.99 in the...

BMR Driveshaft Tunnel Brace (Rear)

$109.95

- 100% bolt-on design- No fabrication needed- Installs with simple hand tools- Manufactured from CNC-formed, CNC laser cut 1/4-inch steel- Reinforces the floor and driveshaft...

BMR End Link Kit (Set) - 15+ Mustang

$259.95

The amount of force exerted on the sway bar end link is staggering—especially if you’ve upgraded to an aftermarket sway bar, like BMR Suspension's SB043....

BMR Front End Link Kit - 15+ Mustang

$139.95

The amount of force exerted on the sway bar end link is staggering—especially if you’ve upgraded to an aftermarket sway bar, like BMR Suspension's SB044....

BMR Front Lowering Springs (Handling) - 15+ Mustang

$119.95

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out....

BMR Front Performance Springs - 15+ Mustang

$99.95

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out....

BMR Front Sway Bar Kit (Hollow, 33mm, 3-bolt Adjustable) - 15+ Mustang

$289.95

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway...

BMR K Member (Lowered Motor Mounts, STD Rack Mounts)

$449.95

- Designed to fit 2005-2014 S197 Mustang- Lighter than other competitors K-members due to integrated motor mount design - Manufactured from 1-inch, 1-1/4-inch, and 1...

BMR K Member (STD Motor & Rack Mounts) (05-10 Mustang)

$499.95

- Designed to fit 2005-2014 S197 Mustang- Lighter than other competitors K-members due to integrated motor mount design - Manufactured from 1-inch, 1-1/4-inch, and 1...

BMR K-Member (No Motor Mounts - STD Rack Mount) (05-10 Mustang)

$449.95

- Designed to fit 2005-2010 S197 Mustang- Lighter than competitors K-members - Built from heavy-duty 1-inch x 0.120 wall and 1-1/4-inch x 0.095 wall DOM...

BMR Loop Upgrade for Rear Tunnel Brace (05-14 Mustang)

$39.95

- Fits 2005-2014 V6 and V8 Ford Mustang- Driveshaft Loop for DTB002- Bolt-on design- No fabrication needed- Complies with NHRA rules- Required for cars quicker...

BMR Lowering Springs (Front - Drag Version) - 15+ Mustang

$119.95

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out....

BMR Lowering Springs (Handling) - Set of 4 - 15+ Mustang

$269.95

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out....

BMR Lowering Springs (Rear - Drag Version) - 15+ Mustang

$149.95

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out....

BMR Lowering Springs (set - Drag Version) - 15+ Mustang

$269.95

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out....

BMR Lowering Springs - Performance - Set 15+ Mustang

$209.95

There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out....

BMR Motor Mount Kit

$139.95

Fits 2015 and newer Ford Mustang GT and V6 Models95-durometer polyurethane bushingsLaser cut ¼-inch plate steel with durable powdercoat finishBlack anodized 6061-T6 aircraft-grade billet aluminum...